Have you encountered such a situation? I came for repairs because of a tire leak, and after the repair, I found that the tire pressure warning light was still on. What will you do?
1. Toyota Crown
Solution: There is a small SET button above the brake pedal to reset when pressed.
2. Buick commercial vehicle GL8
Solution: What needs to be noted here is that the old model GL8 does not have a tire pressure light! For the new GL8 Lu Zun, the way to eliminate it is to press the enter key next to the air outlet of the middle air conditioner (right) a few times. The instrument will display tire pressure reset, and then press and hold the enter key.
3. Mercedes-Benz CLS300
Solution:
1).The vehicle is in starting state;
2). Check whether the instrument displays an image of the total kilometers (if it does not display, press the return key on the left bottom of the steering wheel to display the total kilometers);
3). Press the upward arrow on the left side of the steering wheel (English appears on the instrument);
4). Press the R key on the instrument (if not, press a rising pole on the instrument and click it) (the instrument will pop up an English paragraph);
5). Press the + sign on the right side of the steering wheel;
6). Restart the vehicle and the air pressure light will no longer be displayed.
4. Mercedes-Benz E350
Eliminate tire pressure: Press the right arrow button on the steering wheel, when jumping to the maintenance menu, press the tire pressure recovery button and press OK.
5. BMW 320i
Solution: If the air pressure has been adjusted to the standard value, long press the button in the lower left corner of the instrument panel. When the vehicle maintenance items are displayed on the display, slide the button in the lower left corner of the steering wheel to the tire pressure setting. Press the BC key next to it again to reset. If the warning light comes on after driving for a while after resetting, there should be a leak in the tire.
6. BMW X5
Solution: Inflate the tire enough to re-ignite it and then press and hold the tire pressure monitoring button for a few seconds.
7. Audi A6L
(1) Press the CAR button first and select the tire pressure monitoring system.
(2) Enter and select Store Air Pressure Now, confirm to cancel.
8. Audi Q5
There is a button like a basin with an exclamation mark in front of the gear lever. This is the air pressure setting button. First, adjust the tire pressure to the standard air pressure, turn on the ignition switch, and hold this button down with your hand until a message appears on the instrument. The same yellow light until this light goes out, the setting is complete!
As consumers become more aware of the importance of tires, this will also prompt more vehicles to be equipped with tire pressure monitoring functions in the future.